There are a few key distinctions between furniture repair and furniture Refinishing. Refinishing involves minimal dressing, typically done with water. Refurbishing, however, involves the total repair of an item. The purpose of a complete restoration process for antique pieces is to protect its structural integrity and retain its value.
One of the most frequent reason why a person would decide to undertake a furniture refinishing is when they purchased furniture that is damaged from a yard sale or through an auction. Many individuals choose to do this due to the fact that the original construction of the piece might not have been safe or structurally sound. It is possible to determine if wood in an older piece has been damaged by weathering or poor maintenance. In order to be able to fully restore a piece there must be at least some flaws present. If the wood in a piece is not able to be repaired then furniture refinishing is a preferred solution.
After the piece is completed, you will need to complete the finish. Finishes are available in a variety of options. Based on your preference, you may prefer to purchase the dish soap and water mixture that will wash the surface of your wood furniture and protect it from any damage that could happen in time. Many also prefer to purchase a whitewash paint for their furniture refinishing requirements.
Refinishing wood furniture usually takes between two and three days. You will first need to get rid of cushion springs and box springs. Don’t forget to take out any hardware. After you have cleaned the surfaces, apply a fine coat of varnish on the entire piece with a brush or roller.
Two coats of varnish are the best method to avoid cracking. In addition, other options for refinishing furniture from the past include paint finishes. Paint finishes can provide many unique designs and colors that easily be matched to existing furniture. Paint finishes provide greater protection than varnish as they are less difficult to clean. But, since paint has a an appealing appearance, many homeowners feel that these types of refinishing are more appealing than varnish.
After you have applied all the finishes you desire After you have applied all the desired finishes, let it dry for a few hours. This will help to ensure that the next day’s cleaning and care will be easier. You must ensure that you make use of the right power sander to clean and protect antique furniture. While your basic power sander is likely fine, you may need an upgraded model to achieve optimal results.
One option that a lot of people opt for when refurbishing furniture is to use epoxy putty. You can get professional results with epoxy putty in a variety of forms. To ensure the best results with this method of refinishing, it is important to select an excellent quality epoxy. You may end up with ugly, large marks and bubbles if you don’t take care with this product.
After coating and sanding the piece, you should then apply at least three coats of clear coating to help protect your furniture from scratches. Clear coat protects your furniture from scratches and provide it with the durability and look you want. The coat is best applied using a the largest and most precise brush. Although mechanical tools can be used for applying the coat but they are not recommended, as even the slightest scratch can leave an unattractive white mark on the surface. Once the three layers are put on, let the pieces dry for an hour prior to placing them away.
know more about Exterior wood preserving here.