There are key differences between furniture refinishing and furniture repair. Refinishing is a simple process that is typically carried out using water. Refurbishing, on the other hand, involves the total repair of the piece. In other words, when you do the entire refinishing process of an antique piece, the goal is to maintain the structural integrity of it in order to retain it’s value.
Many people choose to refinish furniture because they have bought furniture that is damaged from an auction or yard sale. This is typically because the original construction of the item could have been flawed or structurally unsound. It is quite possible to determine whether or not the wood in an old piece has been affected by weathering or improper treatment. To be able to be able to fully restore a piece it must have at the very least some flaws. If the wood of a piece is damaged and can no longer be repaired and furniture refinishing is the preferred solution.
After the piece is completed after which you must finish the piece. There are a myriad of options for finishes. You can choose to use a dish soap and water combination according to your preference. This will clean your furniture made of wood and protect it from further damage. Whitewash paint is also a popular choice for refinishing furniture.
Refinishing wood furniture usually takes two to three days. To begin, you’ll need to remove the cushions or box springs, as well as any other items that you no longer want to use. Do not forget to remove any hardware from your items as well. Once you have cleaned up the surfaces, apply a thin coat of varnish on the entire piece with either a roller or brush.
Two coats of varnish is the best way to prevent cracking. In addition, other options for antique furniture refinishing include paint finishes. Paint finishes can be modified to match furniture using a range of distinctive designs and colors. Paint finishes are more durable than varnish, and they are much easier to clean. Paint finishes are considered more appealing than varnish due to the fact that they have a more attractive appearance.
After you have applied all of the desired finishes After that, you must allow it to dry over night. This will make it easier to clean and maintain your furniture the next day. You must ensure that you use the right power sander for cleaning and protecting antique furniture. Although your standard power sander is likely fine but you may require an expensive model to achieve optimal results.
One option that many choose when it comes to finishing furniture is to use epoxy putty. You can get professional results using epoxy putty in many different forms. To help achieve the best results from this technique of refinishing, it is essential to use an excellent quality epoxy. You may end up with large, unattractive bubbles and marks if do not take care when using this product.
After coating the piece and sanding the piece you should apply at least three coats of clear coating to help protect your furniture from scratches. Clear coat will protect your furniture from scratches and give it the durability and look you want. This coat must be applied using a an extremely large and precise-edged brush. It is possible to use mechanical tools to apply the coating, however, they are not recommended as even the slightest scratch could leave an unattractive white mark. After the three layers are applied, you should then allow the pieces to dry for an hour prior to taking them off.
know more about Exterior wood preserving here.